Herunterladen Inhalt Inhalt Diese Seite drucken

Restore And Reset; Restore Points; Factory Setting - Wilo -Stratos GIGA2.0-I Einbau- Und Betriebsanleitung

Vorschau ausblenden Andere Handbücher für Wilo-Stratos GIGA2.0-I:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

en
16

Restore and reset

Restore and reset

Restore points

Save/access settings

Factory setting

Reset settings
Fig. 93: Restore and reset
16.1
Restore points
Restore points
Save settings
at restore point
Restore settings
from restore point
Fig. 94: Restore points – Save settings
16.2
Factory setting
Restore factory settings
Factory setting
Reset settings
Factory setting
Cancel
Fig. 95: Factory setting
214
Saved settings can be retrieved via restore points in the "Restore and reset" menu, but the
pump can also be reset to factory settings.
When the pump has been completely configured, e.g. for commissioning, the configured set-
tings can be saved. If there has been a change in the settings in the meantime, the saved
Save the
overall pump setting
at one of
settings can be retrieved via the restore points.
three restore points
in order to
be able to
restore it later.
Up to three different pump settings can be saved as restore points. If required, these saved
settings can be retrieved/restored via the "Restore settings" menu.
The pump can be reset to factory settings.
In the
Factory settings are
restored
1.
"Factory setting"
CAUTION!
All settings will be
lost!
2.
"Restore factory setting"
3.
and "Confirm factory setting" one after the other.
Settings
Set control mode
Setting assistant
Pump On/Off
Twin-head pump operation
Connecting twin-head pump
Twin-head pump alteration
External interfaces
SSM relay
Function SSM relay
Trigger delay
Reset delay
SBM relay
Function SBM relay
Trigger delay
Reset delay
Installation and operating instructions • Wilo-Stratos GIGA2.0-I, Wilo-Stratos GIGA2.0-D • Ed.02/2022-07
"Restore and reset" menu, select
NOTICE
Resetting pump settings to factory settings replaces the current pump
settings!
Stratos GIGA2.0
Radiator – Dynamic Adapt plus Basic control mode – n-
Motor on
Single pump: not connected
Twin-head pump: connected
24 h
Faults and warnings
5 s
5 s
Motor in operation
5 s
5 s
Stratos GIGA2.0 ... R1
const.
Motor on
Single pump: not connec-
ted
Twin-head pump: con-
nected
24 h
Faults and warnings
5 s
5 s
Motor in operation
5 s
5 s

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Wilo-stratos giga2.0-d

Inhaltsverzeichnis