Transport For Installation/Dismantling Purposes - Wilo -Stratos GIGA2.0-I Einbau- Und Betriebsanleitung

5.4 Transport for installation/dismant-
ling purposes
Installation and operating instructions • Wilo-Stratos GIGA2.0-I, Wilo-Stratos GIGA2.0-D • Ed.02/2022-07
Fig. 6: Lifting direction
The pump must be transported using approved lifting gear (hoist, block and tackle, etc.).
The lifting gear must be attached to the transport lugs at the motor flange. Slide the lifting
loops under the adapter plate, if necessary (Fig. 6).
WARNING
Damaged transport lugs can break off and cause considerable
personal injury.
• Check the transport lugs before use for damage and secure fixation.
NOTICE
To improve the weight distribution, the transport lugs can be swivelled/
rotated according to the lifting direction.
To do so, loosen and then re-tighten the fastening screws!
DANGER
Risk of fatal injury from falling parts!
The pump itself and pump parts can be extremely heavy. Falling parts
pose a risk of cuts, crush injuries, bruises or impacts, which can be fatal.
• Always use suitable lifting equipment and secure parts against falling.
• Never stand underneath a suspended load.
• During storage and transport, as well as before all installation and as-
sembly work, ensure that the pump is in a safe position and standing
securely.
WARNING
Personal injury due to unsecured installation of the pump!
The base with the threaded holes is used for fixation only. When standing
freely, the pump might not be sufficiently stable.
• Never place the pump unsecured on the pump support feet.
en
137