Operator Responsibilities; Transportation And Storage; Shipping; Transport Inspection - Wilo Atmos GIGA-I Einbau- Und Betriebsanleitung

en
2.8

Operator responsibilities

3

Transportation and storage

3.1

Shipping

3.2

Transport inspection

3.3

Storage

46
Transportation and storage
ƒ
Provide installation and operating instructions in a language which the personnel
can understand.
ƒ
Make sure that personnel are suitably trained for the specified work.
ƒ
Verify the area of responsibility and individual responsibilities of personnel.
ƒ
Provide the necessary protective equipment and make sure that personnel wear it.
ƒ
Ensure that safety and information signs mounted on the device are always legible.
ƒ
Train personnel with regard to the operating principles of the system.
ƒ
Eliminate risks from electrical current.
ƒ
Equip hazardous components (extremely cold, extremely hot, rotating, etc.) with a
guard to be provided by the customer.
ƒ
Remove leakages of hazardous fluids (e.g. explosive, toxic or hot) in such a way
that no danger is posed to persons or the environment. Comply with national stat-
utory provisions.
ƒ
Keep highly flammable materials at a safe distance from the product.
ƒ
Ensure compliance with the regulations for accident prevention.
ƒ
Ensure compliance with local directives or general directives [e.g. IEC, VDE, etc.]
and instructions from local energy supply companies.
Follow all information that appears on the product and ensure that it remains perman-
ently legible:
ƒ
Warnings
ƒ
Rating plate
ƒ
Direction of rotation arrow/symbol for direction of flow
ƒ
Identification of connections
This device can be used by children from 8 years of age as well as people with reduced
physical, sensory or mental capacities or lack of experience and knowledge if they are
supervised or instructed on the safe use of the device and they understand the dangers
that can occur. Children are not allowed to play with the device. Cleaning and user
maintenance must not be carried out by children without supervision.
The pump is secured to a pallet ex works, packaged in a box and protected against dirt
and moisture.
Check delivery immediately for damage and completeness. Defects must be noted on
the freight documentation! Defects must be notified to the transport company or the
manufacturer immediately on the day of receipt of shipment. Subsequently notified de-
fects can no longer be asserted.
Only remove the outer packaging at the place of utilisation to ensure that the pump is
not damaged during transport.
CAUTION
Damage due to incorrect handling during transport and storage!
Protect the product from moisture, frost and mechanical damage during transport
and temporary storage.
If available, leave the covers on the pipe connections so that no dirt and other foreign
matter can get into the pump housing.
To avoid scoring at the bearings and sticking, turn the pump shaft once a week using a
socket wrench.
If a longer storage time is required, contact Wilo for preservation measures.
WARNING
Risk of injury due to incorrect transport!
If the pump is transported again at a later date, it must be packaged so that it cannot
be damaged during transport. Use the original packaging for this, or choose equival-
ent packaging.
WILO SE 2022-06