Reset - Wilo Yonos GIGA2.0-I Einbau- Und Betriebsanleitung

Measured values
Operating data
Statistical data
Fig. 98: Measured values menu
Operating data
H is = 0.0 m
n is = 3800 /Min
P electr = 6 W
U mains = 0 V
Fig. 99: Operating data
Statistical data
W electr = 0 kWh
Operating hours = 8 h
Fig. 100: Statistical data
16

Reset

Factory setting
Back to factory settings
Fig. 101: Resetting to factory setting
Installation and operating instructions • Wilo-Yonos GIGA2.0-I/-D • Ed.01/2023-03
Universal
2.0
2.2
2.2.1
H act =
n act =
P electr =
U mains =
2.2.2
W electr =
Operating hours =
The following information is displayed in the "Operating data" submenu:
• Hydraulic operating data
–
Current delivery head
–
Current speed
• Electrical operating data
–
Current electrical power consumption
–
Current power supply on mains side
• Statistical data
–
Total consumed electrical power
–
Operating hours
The pump can be reset to the factory setting in the menu
lowing:
Universal
3.0
3.1
Confirm
CANCEL
Display text
Diagnostics and measured values
Measured values
Operating data
H is =
n is =
P electr =
U mains =
Statistical data
W electr =
Operating hours =
Display text
Factory setting
Reset to
factory setting
Confirm
(settings will be lost!)
Cancel
en
. To do this, select the fol-
197