Electrical Work - Wilo -Stratos GIGA2.0-I Einbau- Und Betriebsanleitung
Vorschau ausblenden
Andere Handbücher für Wilo-Stratos GIGA2.0-I:
- Montageanleitung (216 Seiten) ,
- Einbau- und betriebsanleitung (144 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.3
Electrical work
Installation and operating instructions • Wilo-Stratos GIGA2.0-I, Wilo-Stratos GIGA2.0-D • Ed.02/2022-07
•
Electrical work: Electrical work must be performed by a quali-
fied electrician.
•
Installation/dismantling work: The installation/dismantling
must be carried out by a qualified technician who is trained in
the use of the necessary tools and fixation materials.
•
The product must be operated by persons who are instructed
on how the complete system functions.
•
Maintenance tasks: The technician must be familiar with the
use of operating fluids and their disposal.
Definition of "qualified electrician"
A qualified electrician is a person with appropriate technical edu-
cation, knowledge and experience who can identify and prevent
electrical hazards.
The operator must confirm and ensure the field of authority, the
competence and the monitoring of the personnel. If the person-
nel do not possess the necessary knowledge, they must be
trained and instructed. If required, this can be carried out by the
product manufacturer at the operator's request.
•
Have electrical work carried out by a qualified electrician.
•
When connecting to the local power supply system, comply
with the nationally applicable guidelines, standards and regula-
tions as well as specifications issued by the local energy supply
companies.
•
Before commencing work, disconnect the product from the
mains and secure it against being switched on again.
•
Give personnel training on how to establish the electrical con-
nection and the methods for switching off the product.
•
Protect the electrical connection with a residual-current device
(RCD).
•
Observe the technical information in these installation and op-
erating instructions as well as on the rating plate.
•
Earth the product.
•
Comply with the manufacturer's specifications when connect-
ing the product to electrical switching systems.
•
Have a defective connection cable replaced immediately by a
qualified electrician.
•
Never remove operating elements.
•
If radio waves (Bluetooth) lead to hazards (e.g. in hospitals),
they must be switched off or removed if they are not desired or
prohibited at the installation location.
en
127
Werbung
Inhaltsverzeichnis
