Wilo -Stratos GIGA2.0-I Einbau- Und Betriebsanleitung Seite 167

10.4.6 Sub-menu
10.4.7 "Settings" sub-menu
Installation and operating instructions • Wilo-Stratos GIGA2.0-I, Wilo-Stratos GIGA2.0-D • Ed.02/2022-07
NOTICE
Pressing the context button
options for further settings.
Pos. Name
1 Main menu over-
view
1.1 Status area:
error, warning or
process information
display
2 Title bar
3 Setpoint display
field
4 Setpoint editor
5 Active influences
6 Reset reference
7 Operating data and
measurement area
8 Context menu ref-
erence
Table 17: Home screen
Each sub-menu is made up of a list of sub-menu items.
Each sub-menu item consists of a title and an information bar.
The title lists an additional sub-menu or a downstream settings dialogue.
The information bar shows descriptive information about the available sub-menu or the
downstream settings dialogue. The information bar of a settings dialogue shows the set
value (e.g. a setpoint). With this display, you can check settings without having to open the
settings dialogue.
Different settings can be changed in the "Settings" menu
Turn the operating button to the "Gear wheel" icon
Press the operating button to change the focus to the "Settings" sub-menu.
Turn the operating button to the left or right to select a sub-menu item. The selected sub-
menu item has been highlighted in green.
Press the operating button to confirm your selection. The selected sub-menu or down-
stream settings dialogue appears.
NOTICE
There is an arrow
more than four sub-menu items. Turn the operating button in the corre-
sponding direction to open the sub-menu items on the display.
will display additional context-related
Explanation
Selection of different main menus
Indicates an on-going process, warning or error message.
Blue: process or communication status display (CIF module
communication)
Yellow: Warning
Red: Fault
Grey: there are no processes running in the background,
there are no warning or error messages.
Display of currently set application and control mode.
Displays currently configured setpoints.
Yellow frame: you have pressed the operating button to
open the setpoint editor and change the value.
Display of influences on set control mode,
e.g. EXT. OFF. You can display up to five active influences.
Shows the value before having changed it when the set-
point editor is active.
The arrow shows that you can go back to the previous value
with the "Back" button.
Shows current operating data and measured values.
Offers context-related options in a separate context menu.
to select the "Settings" menu.
1
above or below the visible menu items if there are
en
.
167