Wilo -Stratos GIGA2.0-I Einbau- Und Betriebsanleitung Seite 168

en
Settings
Set auto control
Settings assistant, setpoints, options
Manual operation
Manual override
Double pump operation
Set double pump
External interfaces
Analogue, digital, SSM, SBM
1
Fig. 34: Settings menu
10.4.8 Settings dialogues
Select type of use
Analogue input (AI2)
Not configured
Setpoint controller
Differential pressure sensor
Temperature sensor
External sensor
Fig. 35: Settings dialogue
168
1
An arrow
Overriding
able in this area. These sub-menu items are accessible by turning
auto control via
manual intervention.
ton.
2
2
An arrow
able. Press
If there is no arrow to the right, press the operating button to open a settings dialogue.
3
A note above the "Context" button shows specific functions of the "Context" menu.
3
Press the "Context" menu button
Settings dialogues have been highlighted with a yellow frame and show the current setting.
Set analogue input
Turn the operating button to the right or left to adjust the highlighted setting.
as setpoint controller,
e.g. for delivery head
Press the operating button to confirm the new setting. The focus returns to the menu you
opened.
If you do not turn the operating button before pressing, the previous setting remains un-
changed.
One or more parameters can be set in the settings dialogues.
• If only one parameter can be set, the focus returns to the menu you opened after having
confirmed the parameter value (pressing the operating button).
• If several parameters can be set, the focus changes to the next parameter after having
confirmed a parameter value.
If you confirm the last parameter in the settings dialogue, the focus returns to the menu
you opened.
Press the "Back" button
changed value will be discarded because it had not been confirmed.
Press the operating button to check set parameters and switch between them. In this
process, existing parameters are once again confirmed, but not changed.
Installation and operating instructions • Wilo-Stratos GIGA2.0-I, Wilo-Stratos GIGA2.0-D • Ed.02/2022-07
above or below a menu area indicates that additional sub-menu items are avail-
towards the right in a sub-menu item indicates that another sub-menu is avail-
the operating button to open this sub-menu.
to open the "Context" menu.
NOTICE
Briefly press the Back button
menu.
Briefly press the Back button
screen. If there is an error, press the "Back" button
ror display ("Error messages" section).
If there is an error, press and hold the "Back" button
any settings dialogue or from any menu level to return to the "Home
screen" or error display.
to return the focus to the previous parameter. The previously
NOTICE
Press the operating button without selecting another parameter or adjust-
ing another value to confirm the setting.
Press the Back button
previous setting. The menu changes to the previous setting or previous
menu.
NOTICE
Pressing the context button
options for further settings.
the operating but-
in a sub-menu to return to the previous
in the main menu to return to the Home
to return to the er-
to discard the current adjustment and retain the
will display additional context-related
(> 1 second) from