Herunterladen Inhalt Inhalt Diese Seite drucken

PeakTech 1190 Bedienungsanleitung Seite 212

Digital oszilloskop mit 16-kanal-logik-analysator
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

49. Battery Using Guide
Fig. 112
50. Charging the oscilloscope
The lithium battery maybe not be charged when delivery. Please charge the battery for 12 hours to make sure
enough power to supply (the oscilloscope should be turned on during charging) to oscilloscope. The battery
can supply power for 4 hours after being charged completely.
There will have battery power indication show on the top of panel when oscilloscope power supplied by the
battery.
,
,
and
imply for different power consumption and when
shows it means the power can
only supply for 5 minutes maximum.
Note:
To avoid superheat of battery during charging, the environment temperature is not allowed to exceed the
permissible value given in technical specification.
Replacing the Lithium Battery Unit
It is usually not required to replace the battery unit. But when it is required to replace it, only qualified
personnel can carry out this operation, and only use the same specification lithium battery.
-211-

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

1230

Inhaltsverzeichnis