Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
12. Logic Analyzer
Logic Analyzer input connection
Insert the plug of OL-16 Logic Analyzer module 50P into the Logic Analyzer signal input on front panel and fix
two screws. Then 16 channel clamp of OL-16 Logic Analyzer connect to target signal and ready for
measurement
13. User interface introduction
1.
Channel and Bus indicate: display current working channel and bus.
2.
Channel binary value display: display binary system value for the channel position in current cursor.
3.
Battery powers indicate: indicate battery power when battery inside.
4.
Decimal system value indicates the position of current cursor in storage area.
5.
Yellow dashed line indicates current cursor.
6.
Blue dashed line indicates current trigger position.
7.
Percentage value indicates current trigger position in storage area.
8.
Sample data area indication: red for bus, blue and green for "0", "1" in each channel data.
9.
Decimal system value indicate the position of current cursor relate to current trigger.
10.
Operation options indicate current function menu and different function menu have different display.
11.
Sample status indicate: "RUN" for sampling and wait for trigger, "TRIG" for trigger detected and wait
for sample finished. "STOP" for sampling finished.
12.
Value indicate current time base.
13.
Info windows: different operation display different info.
14.
Value display current filter modulus setting.
Fig.11 User interface of logic analyzer
-123-
Werbung
Inhaltsverzeichnis
