Herunterladen Inhalt Inhalt Diese Seite drucken

PeakTech 1190 Bedienungsanleitung Seite 209

Digital oszilloskop mit 16-kanal-logik-analysator
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Measurement
Communication
USB1.1, USB for file storage
port
*
Half channel is when only one input channel is available.
Trigger:
Trigger level range
Trigger
level
Accuracy (typical)
Trigger displacement
Trigger Holdoff range
50%
level
setting(typical)
Edge trigger
Pulse trigger
Video Trigger
Slope Trigger
Alternate Trigger
Cursor
Automatic
Waveform Math
Waveform storage
Bandwidth
Lissajou's
Phase
figure
difference
Frequency ( typical)
Internal
EXT
EXT/5
Internal
EXT
EXT/5
Pre-trigger: 655 div. Post-trigger: 4 div
100 ns ~ 10 s
Input signal frequency ≥ 50 Hz
slope
Sensitivity
Trigger condition
Pulse Width range
Modulation
Line number range
Trigger condition
Time setting
Trigger on CH1
Trigger on CH2
△ V and △ T between cursors
Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms,
Overshoot, Preshoot, Freq, Period, Rise Time,Fall Time,
DelayA→B
, DelayA→B
-Duty
+, -, *, /, FFT
4 waveforms
Full bandwidth
±3 degrees
1KHz square wave
± 6 div from the screen center
± 600 mV
± 3 V
± 0.3 div
± ( 40 mV + 6 % of Set Value)
± (200 mV +6 % of Set Value)
Rising,Falling
0.3 div
Positive pulse:>, <, =
negative pulse: >, <, =
24 ns ~ 10s
Support standard NTSC, PAL and SECAM broadcast systems
1-525 (NTSC) and 1-625 (PAL/SECAM)
Positive pulse: >, <, =
negative pulse: >, <, =
24 ns ~ 10 s
Edge, Pulse, Video, Slope
Edge, Pulse, Video, Slope
-208-
, +Width, -Width, +Duty,

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

1230

Inhaltsverzeichnis