Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Carry out the following operation steps for the time cursor measurement of the channel CH1:
1.
Press "CURSOR" and recall the CURS MEAS menu.
2.
Press the F1 menu selection button and choose Time for Type, with two purple dotted lines displayed
along the vertical direction of the screen, which indicating Cursor 1 and Cursor 2.
3.
Press the F2 menu selection button and choose CH1 for Source.
4.
Adjust the positions of CURSOR1 and CURSOR2 according to the measured waveform, with the period
and frequency of Cursor1 and Cursor 2 displayed in the increment window. The current position of
Cursor1 is displayed in the Cursor1 window and that of Cursor2 is displayed in the Cursor2 window (see
Fig. 68).
41.1. The Cursor Measurement for FFT model:
Press the CURSOR button to display the cursor measurement function menu (CURS MEAS) in the screen,
which includes Vamp Measurement and Freq Measurement at the mode of FFT, shown as Fig.69.
Fig. 68 Wave Form of Cursor Measurement
Fig.69 CURS MEAS Menu
-169-
Werbung
Inhaltsverzeichnis
