Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.
Press "F2" to choose threshold as "custom". Menu setting correspond to F3 display the setting voltage
value.
6.
Turn "CH1 Volts/div" knob and set voltage value as "0.50V"
Threshold voltage setting finished (refer to Fig. 89).
44.4. How to set display system
Display system is to set on/off for channel and BUS, also to adjust the contrast of panel display. Press
"A(DISPLAY)" and panel display as Fig. 90.
Fig. 89 Threshold custom setting
Fig. 90 Display menu
-187-
Werbung
Inhaltsverzeichnis
