Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
44.7. How to save and recall
Use the storage menu to save or recall waveforms and setting. The storage depth of waveform for sampling
storage is normal (256K) and low storage (16K). And it can be divided into 4 groups. Memory setting includes
current sampling setting, BUS setup, display setting, threshold setting and trigger setting. And it is possible to
save 10 groups of settings. Waveform storage and setting storage menu display as Fig. 95.
Storage menu instruction as below:
Function
Setting
Memory
Waveform
SEL
Setups
Memory
Wavefor~Waveform3
ID
Setups 0~Setups 9
Save
Recall
For example: to set "WAVE 0" in memory ID to save current waveform and "setting 0" to save current setting.
Follow up below steps:
1.
Press "C(SAVE/REL)" after data acquisition finished and storage menu appears
2.
Press "F1" till storage display as "Waveform"
3.
Press "F2" till memory ID. Display as "Waveform 0"
4.
Press "F3" to save current display waveform. Info window will show "Waveform saving" then show as
"Waveform saved successfully" when storage finished.
5.
Press "F1" till memory SEL as "Setups"
Press "F2" till memory ID. display as "Setups 0"
6.
7.
Press "F3" to save current various settings. Info window show "Setting saved successfully".
8.
Press "F4" to recall the memory waveform or settings (refer to Fig. 96)
Fig. 95 Storage menu
Instruction
Waveform for storage or recall
Setups for storage or recall
Storage 4 groups of waveform
Storage 10 groups of setups
Save current waveform/setting in designated No.
Recall waveform/ setups in designated No.
-191-
Werbung
Inhaltsverzeichnis
