PeakTech 1190 Bedienungsanleitung Seite 184

5. Distributed queue trigger:
make BUS as trigger source and discontinuous setting data in BUS as trigger condition to generate trigger and
also can set 8 data at the same time. Distributed queue trigger menu refer as Fig. 84.
Distributed queue trigger function as below:
Function Setting
Source BUS0~BUS3
0x0000~0xffff
(HEX)
Code
0~65535
(DEC)
Add
Delete
Fig. 84 Distributed queue trigger menu
Instruction
Select the trigger source from BUS0~BUS3
Can be set discretionarily between 0x0000 and 0xffff (HEX) or between
0 and 65535 (DEC) according to the bus and code setting.
Add the code type to the queue
Delete the code type from the queue
-183-