Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
44.8. How to use USB flash disk to storage
Use USB flash disk is to storage acquired data. Insert U disk into USB port, then press "B" key and you can
save the waveform data into the U disk. There is two formats available for choice: Vector format and Bitmap
which the corresponding name will be WAVE1.BIN, WAVE2.BIN, WAVE3.BIN......or WAVE1.BMP,
WAVE2.BMP, WAVE3.BMP....... Then you can open the files in computer by connecting USB disk to
computer.
Note:
During the U disk saving procedure, some notes such as "Waveform saving, "Waveform saved", "USB already
connected", "USB connection interrupt" etc will be prompted.
44.9. How to search
Searches have different operation according to different targets. Search target including trigger position, BUS
value, and pattern.
1. Search triggers position as following steps:
*
Press "2(SEARCH)" and menu appears.
Press "F1" till target display as "Trig position"
*
*
Press "F2" to start searching and current cursor will stop in the trigger position
Fig. 96 Waveform saving
-192-
Werbung
Inhaltsverzeichnis
