21. Implementation of Mathematical Manipulation Function
The Mathematical Manipulation function is used to show the results of the additive, multiplication, division,
subtraction and FFT operations between Channel 1 and Channel 2, and the FFT operation of CH1 or CH2.
The corresponding FCL (Functional Capabilities List) of the Wave Form Calculation
Setting
CH1-CH2
CH2-CH1
CH1+CH2
CH1*CH2
CH1/CH2
FFT
Taking the additive operation between Channel 1 and Channels 2 for example, the operation steps are as
follows:
1.
Press the MATH MENU button and call out the WAVE MATH menu.
2.
Press the F3 menu selection button and choose CH1+CH2. The green calculated wave form M is
displayed in the screen; press the F3 menu selection button again, the wave form M is closed off
(see Fig.26).
Fig. 25 Wave Form Inverted
Subtract the Channel 2 wave form from the Channel 1 wave form.
Subtract the Channel 1 wave form from the Channel 2 wave form.
Add the Channel 1 wave form to the Channel 2.
Multiply Channel 1 wave form by Channel 2 wave form.
Channel 1 wave form is divided by the Channel 2 wave form.
Waveform of Corresponding FFT operation.
-134-
Description