Cosmo Multi 3 Montage- Und Bedienungsanleitung Seite 171

12. SD CARD
Storing controller adjustments
Î To store the controller adjustments on the SD card, select the menu item Save adjust-
ments.
While the adjustments are being stored, first Please wait..., then Done! will be indicated on
the display. The controller adjustments are stored as a .SET file on the SD card.
Loading controller adjustments
1. To load controller adjustments from an SD card, select the menu item Load adjustments.
The file selection window will appear.
2. Select the desired .SET file.
While the adjustments are being loaded, first Please wait..., then Done! will be indicated on
the display.
NOTE:
The controller will only recognise a .SET file if it is stored in a folder named COSMO\
MULTI3 on the first level of the SD card.
NOTE:
To safely remove the SD card, always select the menu item Remove card... before
removing the card.
171