Adjusting Optional Functions - Cosmo Multi 3 Montage- Und Bedienungsanleitung

108
3. OPERATION AND FUNCTION
All adjustments made for the timer are deleted.
3.5

ADJUSTING OPTIONAL FUNCTIONS

In the Opt. functions / Add new function menus, optional functions can be selected and
adjusted.
The kind and number of optional functions offered depends on the previous adjustments.
When a function is selected, a submenu opens in which all adjustments required can be made.
In this submenu, an output and, if necessary, certain system components can be allocated to
the function.
If an output can be allocated to the function, the Output submenu opens (see page 109).
When a function has been adjusted and saved, it will appear in the Opt. functions menu
above the menu item Add new function.
This allows an easy overview of functions already saved.
An overview about which sensor has been allocated to which component and which output has
been allocated to which function is given in the Status menu.
At the end of each optional function submenu, the menu items Funct. And Save function are
available. In order to save a function, select Save function and confirm the security enquiry by
selecting Yes.
In functions already saved, the menu item Delete function will appear instead.
In order to delete a function already saved, select Delete function and confirm the security
enquiry by selecting Yes. The function will become available under Add new function again.
The corresponding outputs will be available again.