Sensor Configuration - Cosmo Multi 3 Montage- Und Bedienungsanleitung

112
3. OPERATION AND FUNCTION
3.7

SENSOR CONFIGURATION

Some sensors must be registered and configured in the Inputs/Modules menu (see page
112 and page 175).
In some functions, the Sensor config. channel is available for sensor selection, in which sen-
sors not used and not registered can be selected. The selected sensor input will automatically
be set to the sensor type required for the function. Registering the sensor in the Inputs/Mod-
ules menu is then no longer necessary.
NOTE:
If a sensor is used as the temperature sensor of a function, the sensor types Switch,
Fern, BAS, Impulse and none will not be available for the corresponding input.