Transport For Installation/Dismantling Purposes - Wilo Yonos GIGA2.0-I Einbau- Und Betriebsanleitung

Fig. 5: Turning the shaft
5.4 Transport for installation/dismant-
ling purposes
Installation and operating instructions • Wilo-Yonos GIGA2.0-I/-D • Ed.01/2023-03
Leave stickers on the pipe connections so that no dirt and other foreign matter can get into
the pump housing.
To prevent scoring at the bearings and sticking, turn the pump shaft once a week using a
socket wrench (see Fig. 5).
If a longer storage time is required, contact Wilo for preservation measures.
WARNING
Risk of injury due to incorrect transport!
If the pump is transported again at a later date, it must be packaged so
that it cannot be damaged during transport. Use the original packaging for
this, or choose equivalent packaging.
Damaged transport lugs can break off and cause considerable personal in-
jury. Check the transport lugs before use for damage and secure fixation.
Fig. 6: Single pump lifting direction
Fig. 7: Twin-head pump lifting direction
The pump must be transported using approved lifting gear (hoist, block and tackle, etc.).
The lifting gear must be attached to the transport lugs at the motor flange. Slide the lifting
loops under the adapter plate, if necessary (Fig. 6/7). Secure the pump against tipping.
en
127