About This Guide; Symbols And Conventions; Technical Terms And Abbreviations Used - Balluff BOS R254K-UUI-RH11-S4 Konfigurationsanleitung

BOS R254K-UUI-RH11-S4
Photoelectric Sensors
1

About this Guide

1.1 Validity
This guide provides extensive information about the
IO-Link configuration of the following products:
– BOS R254K-UUI-RH11-S4
Order code: BOS02C4
The configuration guide does not replace the user's guide.
Read the appropriate user's guide and the other applicable
documents completely before installing and operating the
product.
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2022, Balluff GmbH
All content is protected by copyright. All rights reserved,
including the right to reproduce, publish, edit and translate
this document.
1.2

Symbols and conventions

Individual action instructions are indicated by a preceding
triangle.
► Instruction 1
Numbers unless otherwise indicated are decimals
(e.g. 23). Hexadecimal numbers are represented with a
preceding 0x (e.g. 0x12AB).
Note, tip
This symbol indicates general notes.
1.3

Technical terms and abbreviations used

AdSS Adjustable Switching Sensor
BLOB Binary Large Object
CCM Comprehensive Condition Monitoring
CM Condition Monitoring
CNT Counter
IODD IO-Device-Description
ISDU IO-Link-Parameter (Index Service Data Unit)
LSB Least Significant Bit
LSSC Legacy Smart Sensor Channel
MSB Most Significant Bit
PD Process Data
RMS Root Mean Square
SSC Switching Signal Channel
SP Set point
TP Teachpoint
www.balluff.com english 5