Figure 14 Footrest Locking Mechanism; Figure 15 Adjusting The Lower Leg Length - Ottobock C1000 DS Gebrauchsanweisung

Operation
Installing the footrests
1. Reinsert the footrest from above by placing it in the
adapter and swinging it forward until the footrest lock-
ing mechanism engages.
2. Reattach the calf band to the adapter.
Figure 14 Footrest locking mechanism
Adapting the footrests to the lower leg length
1. Loosen the screws on the footplate bar using an Allen
wrench size 4 (see Figure 15).
2. Move the footrests up or down to adapt the height
to the individual lower leg length and seat cushion
thickness.
154 Ottobock
|
3. Retighten the screws.
INFORMATION
When making the adjustment, ensure that the footplate bar
(Figure 15, item b) slides at least 60 mm into the swivel
segment (Figure 15, item c). After completing the adjust-
ment, tighten the set screw with a torque of 8 Nm.
Figure 15 Adjusting the lower leg length
C1000 DS