Footrests; Figure 13 Adapting The Control Panel - Ottobock C1000 DS Gebrauchsanweisung

Figure 13 Adapting the control panel
INFORMATION
If the control panel rail is too long, the protruding part can
simply be cut off with a saw.
Changing the control panel mounting side
The standard configuration has the control panel mounted
on the right side. If desired by the user, it can also be mount-
ed on the other side of the power wheelchair.
INFORMATION
Only authorised personnel may change the control panel
mounting side.
C1000 DS

6.1.5 Footrests

CAUTION
Risk of pinching. Ensure limbs are clear of the danger
zone when folding the footrests up or down.
NOTICE
Risk of damage to the front lighting. Do not swing the
footrests to the outside or damage to the front lighting may
occur.
INFORMATION
Complete removal of the footrest from the adapter is only
permitted for transportation of the C1000 DS power
wheelchair.
Removing the footrests
1. Remove the calf band.
2. Fold the footrests up, release the footrest locking
mechanism (see Figure 14) and swing the footrest to
the inside.
3. Pull the footrest up to remove it.
Operation
Ottobock 153
|