Controlling Additional Electrical Functions - Ottobock C1000 DS Gebrauchsanweisung

Operation
If the battery symbol and all the segments are flashing, this
means that the battery is over voltage. Since this will lead to
battery damage, a warning symbol also appears.
The charging process is indicated by the battery segments
lighting up one after the other. When the battery is charging,
the driving function is locked out.
Display symbol(s)
Table 2 Battery indicator on the control panel
162 Ottobock
|
Information
Driving menu with speed
level and battery capacity
Low battery capacity
Charging process with drive
stop
Battery is under voltage, with
warning symbol
Battery is over voltage, with
warning symbol

6.3.6 Controlling additional electrical functions

INFORMATION
For more information on the additional electrical functions,
please see Section 7.
Additional electrical functions, e.g. electric back angle ad-
justment and seat tilt, are accessed by pressing the "M"
button (approximately 2 seconds).
To change between the different functions, briefly press the
button „M" or move the joystick to the right. The function that
is currently selected is shown on the LCD monitor. The re-
spective function can be extended or retracted by moving
the joystick ahead or back. The electric motor moves the
respective function as long as the joystick is deflected and
stops at the end positions.
Electric back angle adjustment: When the joystick is de-
flected ahead or back, the back rest moves ahead or back
accordingly. The electric motor moves the back rest as long
as the joystick is deflected and stops at the end positions.
Electric seat tilt: Deflecting the joystick to the rear will elec-
trically tilt the seat to the rear. Deflecting the joystick to the
front tilts the seat ahead until it is level (factory setting, may
be adapted by the specialist dealer).
C1000 DS