Warning; Error - Ottobock C1000 DS Gebrauchsanweisung

Malfunctions / troubleshooting
8.1

Warning

A warning indicates a status or malfunction of one or several
components of the power wheelchair. The function of compo-
nents that have no errors is not restricted. For example, if the
connection between the controller and seat motor malfunctions,
this error will only be indicated if the user attempts to activate
the motor. However, the driving function is still available.
8.2

Error

CAUTION
Risk of injury if the power wheelchair stops abruptly. In
the event of communication problems in the bus system of
the control unit, the system triggers an emergency stop to
prevent any uncontrolled functions. Depending on the
source of the malfunction, it is possible to drive the wheel-
chair out of a danger zone such as road traffic after switch-
ing the control unit on again.
If the driving function is still not available after switching
the control unit on again, the brake must be deactivated
(see Section 6.5) to switch over to pushing mode. After the
power wheelchair has triggered an emergency stop, con-
tact a specialist dealer as soon as possible!
202 Ottobock
|
CAUTION
Risk of accidents due to uncontrolled driving character-
istics. Uncontrolled movements can occur during the op-
eration of the power wheelchair as a result of malfunctions.
In this case, please contact your authorised specialist
dealer immediately.
An error affects one or several functions of the power wheel-
chair. The system is not fully operational until the error has
been corrected.
C1000 DS