Changing The Battery Installation Position; Figure 29 Battery Stop; Figure 30 Release Bolt Engaged - Ottobock C1000 DS Gebrauchsanweisung

Operation
Figure 29 Battery stop
1 Stop, rear position
INFORMATION
When installing the track, ensure the release bolt engages
correctly. It has to lock into the corresponding recess on
the drive unit sustainer.
176 Ottobock
|
1
Figure 30 Release bolt engaged

6.6.5 Changing the battery installation position

WARNING
Risk of tipping due to changes in the centre of gravity.
Changing the battery position also changes the centre of
gravity of the C1000 DS. There is a risk that the steering
casters may loose ground contact and the front anti-tipper
may engage.
Test the effects of the centre of gravity shift on the behavi-
our of the power wheelchair with the support of an atten-
dant.
C1000 DS