Footrest; Adapting The Control Panel - Ottobock Skippi Gebrauchsanweisung

Fig. 22

Adapting the control panel

Changing the control panel mounting side
INFORMATION
The control panel mounting side may only be changed by
authorised personnel.
The standard configuration has the control panel mounted
on the right side. It can also be mounted on the left side of
the power wheelchair if the user so desires.
Skippi
Downloaded from www.Manualslib.com manuals search engine

6.1.5 Footrest

CAUTION
Risk of pinching. Ensure that your fingers are not in the
danger area when flipping the footrests up or down. The
footrests may only be removed entirely from their holders
when the wheelchair is being transported.
Removing the footrests
1. Press the footrest latch (see Fig. 23).
2. Pull the footrest up and remove it.
Installing the footrests
1. Slide the footrest into the holder from above until the
latch clicks in place.
Operation
Ottobock 131
|