Swing-Away Control Panel Holder - Ottobock C1000 DS Gebrauchsanweisung

Figure 47 Height adjustment of control panel holder

7.4.4.2 Swing-Away Control Panel Holder

To allow the user to drive the power wheelchair closer to an
object or under the edge of a table, the control panel can be
swung to the side with a special control panel holder (see Fig-
ure 48).
n Apply slight pressure to move the control panel holder to
the side and release the pivot element.
n Swing the control panel holder to the side.
n When bringing the control panel holder back to its origi-
nal position, the pivot element automatically locks into
place.
C1000 DS
Figure 48 Swing-away control panel holder
7.4.3 Lap Belt
WARNING
Risk of injury due to improper use of the lap belt. The
lap belt helps to additionally stabilise the person sitting in
the power wheelchair. The lap belt must never be used as
part of a restraint system for transportation of the person
in a wheelchair accessible vehicle.
Accessories
Ottobock 197
|