Figure 55 Removing The Casing - Ottobock C1000 DS Gebrauchsanweisung

4. Using a tyre lever, remove the casing from the rim.
5. For pneumatic tyres: Press the valve to the inside
through the rim.
6. For pneumatic tyres: Pull out the tube.
7. For pneumatic tyres: Repair the inner tube with a
standard tyre repair kit or replace it with a new one.
8. If applicable, replace the defective casing with a new
one and install it on the rim.
9. Join the two parts of the rim using the five Allen head
screws.
10. For pneumatic tyres: Inflate the tyre; observe the
allowable tyre pressure.
11. Reinstall the wheel on the power wheelchair
(see Section 9.3.1 and 9.3.2).
C1000 DS
Maintenance, cleaning and disinfection
Figure 55 Removing the casing
Ottobock 215
|