Storage; Figure 6 Folding The Back Rest; Figure 7 Folding Size - Ottobock C1000 DS Gebrauchsanweisung

2. Pull the release strap to the rear.
3. With your hand, fold the back rest down onto the seat
bottom.
Figure 6 Folding the back rest
Folding the back rest with electric back angle adjustment
1. Remove the side panels (see Section 6.1.3).
2. Unlock the cross bolts on the lower end of the drive unit
by pushing the lever up (see Section 4.3 "Initial opera-
tion", Figure 4).
3. Remove the cross bolt from the holder.
4. With your hand, fold the back rest down onto the seat
bottom.
C1000 DS
Figure 7 Folding size
Prior to operating the power wheelchair with back angle
adjustment, proceed in the reverse sequence.
5.3

Storage

The C1000 DS power wheelchair must be stored in a dry
place.
For transportation and storage, an ambient temperature
between -40 °C and +65 °C must be observed.
Transportation and storage
Ottobock 147
|