Ottobock C1000 DS Gebrauchsanweisung Seite 193

Figure 43 Push button module
1 Available electric functions
2 "Function selection" mode button
3 "Selected function" LED indicator
4 Up / Down arrow keys (see information box)
5 Stereo plug for the connection of Piko buttons
C1000 DS
7.3.6 2x Adapter Cable for Piko Button
1
The power wheelchair may be equipped with a 2x adapter
2
cable. The respective Piko button that is connected may be
used to control electrical seat functions. The functions to be
3
controlled are selected when the power wheelchair is or-
4
dered. Your specialist dealer can change the assignment of
the button using a handheld programming device or pro-
gramming station.
The buttons are equipped with a so-called toggle function.
This means that the selected function is activated as long as
the button is pressed.
Pressing the button again activates the selected function in
5 the opposite direction. For example, when the function for
the electric back rest is activated, the back rest moves back
as long as the button is pushed the first time the button is
activated. Activating this function again causes the back
rest to move forward as long as the button is pushed.
Accessories
Ottobock 193
|