Height Adjustable Control Panel Holder - Ottobock C1000 DS Gebrauchsanweisung

Accessories
Attaching the Recaro Seat to the Chassis
CAUTION
Risk of injury if the locking bolts are not engaged. When
mounting the Recaro seat, the seat adapter must be se-
curely attached to the retainer bushings. The anterior lock-
ing bolts have to snap into place up to the key ring.
n Place the posterior edge of the Recaro seat on the end
of the seat frame.
n Slide the seat forward until the posterior seat adapter
hangs in the retainer bushings.
n Tilt the seat ahead until the locking bolts engage with
the seat frame up to the key ring (see Fig. 46, item 2).
Visually inspect and shake the seat to ensure se-
CAUTION
cure locking.
196 Ottobock
|
Figure 46 Releasing/locking the Recaro seat
Control Panel Holder
7.4.2

7.4.2.1 Height Adjustable Control Panel Holder

An optional special control panel holder can be mounted on
the power wheelchair, allowing the height of the control
panel to be adjusted. In order to do so, loosen the attach-
ment screw (see Figure 47) and move the control panel to
the desired height.
C1000 DS