Push Button Module - Ottobock C1000 DS Gebrauchsanweisung

Accessories

7.3.5 Push Button Module

CAUTION
Risk of accidents due to uncontrolled driving character-
istics. The push button module is an option for the use of
the enAble50 system. Improper adaptation of the push
button module to a power wheelchair with components
outside the Ottobock modular system or subsequent modi-
fications by the user are not permitted.
The push button module lets the user select additional elec-
trical functions directly during normal driving operation.
Available functions
Depending on the power wheelchair model and the pro-
gramming of the push button module, up to 5 electric func-
tions can be controlled during normal driving operation
(Figure 43, item 1). Examples include:
n Seat tilt
n Electric back angle adjustment
n Lift seat function
n Right / left footrest; combination of both footrests
n Special functions (combinations) => symbols S1 – S5
192 Ottobock
|
The symbols used on the push button module correspond to
the symbols used on the LCD monitor (see 7.3.3 "Separate
LCD Monitor with Infrared).
Push button functions
The "M" button (= mode, Figure 43, item 2) is used to
advance the individual functions (1-2-3-4-5-1-2-...).
The blue LED (Figure 43, item 3) indicates the selected
function.
The selected function is executed with the arrow keys (Fig-
ure 43, item 4) (function up / down).
INFORMATION
The function of the arrow keys can be adapted according
to the wishes of the user (up arrow = function up or func-
tion down – depending on programming). Programming
may only be completed by instructed specialist staff.
Three freely positionable Piko buttons may also be connect-
ed to the push button module as accessories (Figure 43,
item 5). They assume the function of the mode and up /
down arrow keys (Figure 43, items 2/4). Symbols on the
back of the push button module indicate the corresponding
function.
C1000 DS