Requirements For The User; Safety Functions - Ottobock C1000 DS Gebrauchsanweisung

Safety instructions
INFORMATION
When closing the battery drawer, the release bolt must
engage in the recess provided for this purpose.
INFORMATION
Piston rods do not require lubrication. They are mainte-
nance-free.
INFORMATION
Defective batteries must be disposed of properly in ac-
cordance with country-specific regulations.
2.7

Requirements for the user

CAUTION
Risk of accidents and injury due to improper operation.
The power wheelchair may only be operated by properly
informed users. For this purpose, the user and any attend-
ants must receive instruction in the use of the power wheel-
chair from specialists trained and authorised by Ottobock.
The operator must have read and understood all the infor-
mation in the instructions for use. The wheelchair may not
be operated in cases of exhaustion or under the influence
of alcohol or medications.
136 Ottobock
|
The user must not have any mental limitations which can
temporarily or permanently restrict attentiveness and judg-
ment in road traffic.
2.8

Safety functions

INFORMATION
In dangerous situations, the C1000 DS can be turned off
at any time using the on/off button. When the button is
pressed, the power wheelchair brakes immediately and
the electric functions will be stopped.
Malfunctions such as an insufficient supply of power to
the brake are recognised by the software, triggering the
emergency stop brake or reducing the speed of the pow-
er wheelchair. At the same time, a warning signal will be
emitted.
INFORMATION
The control unit of the C1000 DS power wheelchair must
be reactivated after an emergency stop. In the event of
communication problems in the bus system of the control
unit, the system triggers an emergency stop and thus pre-
vents any uncontrolled functions. If the driving function is
C1000 DS