Armrests; Footrest Assemblies Mounted To The Seat Tube - Ottobock Discovery Gebrauchsanweisung

Accessories
Figure 17

Armrests

Height Adjustment of the Armrests
To adjust the armrest height, loosen the clamp connection (Fig. 17, item A) and move the armrest to the desired
height. Secure this position using the clamping screw.
Angle Adjustment of the Armrests (optional)
To adjust the angle of the armrest, loosen the screw connection (Fig. 18, item A). Adjust the desired angle and
firmly re-tighten the screw connection.

Footrest Assemblies Mounted to the Seat Tube

A
B
Figure 19
Components of the Footrest Assemblies
The footrest assemblies consist of the following components:
- Footrest receiver (Fig. 19, item B)
- Footrest holder (Fig. 19, item C)
- Calf band (Fig. 19, item D)
- Footrest bar (Fig. 19, item E)
- Footplate (Fig. 19, item F)
Footrest Receivers
The different footrest assemblies are adjustable in their depth by pushing the footrest receiver more or less
deeply into the the seat tube which features a corresponding adjustment hole channel. For this purpose, loosen
the Allen head screws (Fig. 19, item A) on both sides and move the footrest receiver to the desired position.
Then re-tighten the Allen head screws.
30 | Ottobock
A
C
D
E
F
Figure 18
A
Figure 20
A
Discovery