Figure 49 Adjusting The Lap Belt - Ottobock C1000 DS Gebrauchsanweisung

Accessories
INFORMATION
For the personal safety of the user, wearing the lap belt at
all times is recommended. The lap belt helps to additionally
stabilise the person sitting in the power wheelchair.
The C1000 DS power wheelchair can be equipped with an
optional lap belt. The lap belt serves exclusively as a safety
belt when driving the C1000 DS power wheelchair.
Applying the lap belt
1. Push the two halves of the buckle together so they en-
gage. The belt buckle must snap in place audibly.
2. Verify that the belt has locked by trying to pulling it
apart. The lap belt should not be too tight on the body.
Objects caught under the belt can cause painful pres-
sure sores.
Opening the lap belt
1. Press the red release button. The belt opens.
Changing the belt length
The belt length can be adjusted on both sides.
1. Position both buckle halves in the middle of the body.
198 Ottobock
|
2. After positioning the buckle halves at a right angle in
relation to the belt, their position can be varied. Any
excessive belt length will be held in place by the plastic
slides.
Figure 49 Adjusting the lap belt
1 Belt buckle
1
C1000 DS