Figure 20 Lcd Monitor With All Symbols - Ottobock C1000 DS Gebrauchsanweisung

Operation
1-...). Pushing and holding the button for at least 2 seconds
switches the control unit to the "Electric seat function" menu.
Horn
The horn will sound as long as the horn button is being
pressed.
Warning flasher
Pressing the warning flasher button activates or deactivates
all four direction indicator lights.
Light
The front and rear lights are activated and deactivated by
pressing the light button.
Direction indicator lights
The right or left front and rear direction indicator lights are
activated and deactivated by pressing the "direction indica-
tor light, right" or "direction indicator light, left" buttons re-
spectively. The direction indicator lights automatically turn
off after 20 seconds.
LCD monitor
The LCD monitor is the communication interface between the
user and the control unit. It indicates the selected speed level,
158 Ottobock
|
the remaining battery capacity and the status of electric op-
tions and special functions as well as warnings and errors. All
display symbols are visible during the initialisation phase.
Figure 20 LCD monitor with all symbols
1 Direction indicator lights, left
2 Battery capacity
3 Electric back rest
4 Electric seat tilt
5 Control panel
6 Drive-away lock
7 Speed level
8 Open-end wrench
9 Excess temperature
10 Direction indicator lights, right
11 Wheel lock for drive wheels
12 Warning
13 Creep speed
14 Power module
15 Drive motor
16 Light
C1000 DS