Maintenance; Type Of Intervention; Water Colling; Air Cooling - Klimagel CAPRI 109 Bedienungsanleitungen

7.

MAINTENANCE

7.1.

TYPE OF INTERVENTION

_________________________________________________________________________
Any maintenance operation requiring the opening of the protective panel must be
carried out with the machine stopped and disconnected from the main power supply!
_________________________________________________________________________
_________________________________________________________________________
It is forbidden to clean and lubricate moving parts!
_________________________________________________________________________
Repairs to the electrical system and the refrigerator must be carried out by qualified
_________________________________________________________________________
The operations necessary for the proper function of the machine during production make the
majority of the ordinary maintenance work integrated in the course of the production cycle.
Maintenance work such as cleaning the parts in contact with the product, replacing the stuffing
box, removing the agitator unit, are normally carried out at each shift end, thus reducing those
which may be the maintenance interventions required.
Below is a list of normal maintenance tasks to be performed:
- Cleaning and Replacing of the stuffing box
Cleaning is to be done at each end of the shift, instead the substitution after a visual inspection
and when finding product leaks inside the tray.
- Cleaning agitator unit
It is to be done at each turn end
- Cleaning scraper
It is to be done at each turn end
- Sheet panel cleaning
It is to be done daily using neutral soaps and having the care of never making contact with
detergents within the agitator unit.
- Cleaning and sanitation
It is to be done at each end of the day according to the procedures in section 6 of this manual.
_________________________________________________________________________
Do not use abrasive sponges that can scratch the surfaces for cleaning the machine
7.2.

AIR COOLING

Periodically clean the condenser by removing dust, paper and anything else that prevents air
passage. For cleaning, use a brush with long bristles or compressed air jet.
7.3.

WATER COLLING

For machines with water-cooling, at the end of the season, in order to avoid any inconvenience
when storing where the temperature may drop below 0 °, it is necessary to remove the water
from the condensation circuit.
MU0000_0717
technical personnel!
WARNING
and its parts.
82 KLIMAGEL