Reception, Movement, Unpacking; Opening Of The Package; Reception; Package Machine Lifting - Klimagel CAPRI 109 Bedienungsanleitungen

2.

RECEPTION, MOVEMENT, UNPACKING

2.1.

RECEPTION

- Before unpacking, check that there are no breakages due to impacts during transport.
- If there is a damage to the packaging and suspect damage to the contents, immediately
advise the insurance company, leaving things as it is detected.

2.1.1. Package machine lifting

Lifting of the package must be done by fully inserting the forks of the lift in the space between
the feet of the pallet distributing the weight of the machine in order to maintain the center of
gravity of the package.
2.2.

OPENING OF THE PACKAGE

In the case where the packaging is made of wood, the walls are nailed together and the
machine is secured by two tie rods connecting the bottom of the machine frame to the wooden
packaging stand.
-The wooden protective packaging is opened using tools suitable for the purpose; It is
recommended to cover exposed parts, hands, with protective gloves as it is possible to that
wooden splinters detach from the packaging.
-Remove the nails, starting from the top leaving uncovered the machine but still fastened to
the pallet (packing pallet).
- Take off the protective cover with which the machine is wrapped.
- Visually check that the machine has not been damaged during transport.
The cardboard box is closed externally by three steel bands.
Inside the machine is secured by other bands.
The opening of the package is done by cutting the bands with shears.
It is recommended to carry out the operation very carefully, as there is a risk of injury during
cutting, if these are not retained with energy during the operation.
MU0000_0717 60 KLIMAGEL