Pump Unit Disassembly ( ) - Klimagel CAPRI 109 Bedienungsanleitungen

6.3. PUMP UNIT DISASSEMBLY (only pump machines)
_________________________________________________________________________
Depressurized cylinders and control switches on 'off'
_________________________________________________________________________
MU0000_0717
CAUTION
1. Unhook the flow tube from the pump using the quick
release technology by simultaneously pressing the dark
collar into the inside and with the other hand pull the tube
out.
2. Rotate the pump unit by 45 ° and pull it out of the
transmission flange.
3. Disassemble the pump unit and all its components.
4. Remove the flow tube from the tank fitting pos. 1.
5. Unscrew the tank fitting.
6. Wash all components in the dishwasher or manually.
7. Reassemble all the components by reverse-ordering.
the disassembly operations and lubricate the ORings with
the supplied food grease.
8. Insert the pump unit into the transmission flange and
rotate the pump unit counterclockwise until it locks onto
the locking pin.
CAUTION
When inserting the flow tube into the pump and the tank
fitting, always make sure to get two "clicks" for blocking
the tube and check the tube firmness manually.
Grease the pipe fitting of pos.2 with food grease and
proceed slowly to screw the fitting on the bottom of the
tank.
79 KLIMAGEL