Klimagel CAPRI 109 Bedienungsanleitungen Seite 71

To change the START / STOP function of the emulsifier on the PLC:
1.Press the button ESC
2.Press the button DOWN ARROW
3.Press the button OK
4.Press the button UP ARROW
5.Press the button OK
parameter corresponding to the machine model.
6.Press the button ARROW DOWN
7.Press the button SEL.
8.Press the button ARROW DOWN
If you want to increase the value.
9.Press the button OK
10.Press the button ARROW DOWN
11.Press the button OK
12.Press the button ESC
MU0000_0717
until you select the STOP function
e select yes, Press the button OK.
Until you select the PARAMETER function
e Press the button RIGHT ARROW
Until you select the first digit of the variable.
If you want to decrease or the button ARROW UP
to save and Press the button ESC
Until you select the function RUN.
and select YES and Press the button OK
71
Until you select the
KLIMAGEL