Preliminary Washing And Sanitization; Preliminary Cleaning; Sanitization; Hygiene - Klimagel CAPRI 109 Bedienungsanleitungen

4.7.

PRELIMINARY WASHING AND SANITIZATION

Before putting into function the machine for the first time, it is necessary to carefully clean the
components and to sanitize the parts in contact with the ice cream.
_________________________________________________________________________
Cleaning and sanitizing are operations that need to be carried out regularly at every
end of production with the utmost care to guarantee the quality of production and the
in accordance to hygiene standards required.
________________________________________________________________________

4.7.1. Preliminary cleaning

1.Fill the two tanks with water.
2.Fill the tank with cleaning solution, then operate the machine by placing the selector in
"WASHING CYCLE" position
3.Lower the dispenser lever and let all the water inside the tanks drain.
4.For disassembly of the machine parts, see the instructions in section "Cleaning,
disassembling and reassembling the parts in contact with the product".
_________________________________________________________________________
Do not leave the washing cycle function for more than 5 minutes

4.7.2 Sanitization

With the machine in stop and with the dispenser levers closed, fill the two tanks with water and
insert the NON-CORROSIVE sanitizing solution.
Position the selector in position "CLEANING CYCLE"
________________________________________________________________________
Extended operation in the "CLEANING CYCLE" position with the cylinder empty or
with internal water and sanitizer, causes beater wear.
_________________________________________________________________________
Allow the machine to operate only for the time required for these operations (recommended
time 10/15 seconds).
Drain the sanitizing solution completely through the product extraction levers.
Note: It is advisable to rinse with running water before operating the machine for production
Do not touch the sanitized parts with your hands or wipes or anything else.
_________________________________________________________________________

4.7.3.Hygiene

Fats contained in ice cream are ideal fields for the proliferation of molds, bacteria etc. To
remove them, wash and clean the organs in contact with mixture and ice cream with the
maximum care as indicated above.
Stainless materials, plastic materials and rubber used in the construction of these parts and
their particular shape make it easy to clean, but do not prevent the formation of molds, etc., in
case of insufficient cleaning.
MU0000_0717
IMPORTANT
IMPORTANT
WARNING
CAUTION
72 KLIMAGEL