Installation And Configuration; Safety Requirements During Installation - Mectron Piezosurgery Plus Gebrauchs- Und Wartungsanleitung

4 INSTALLATION AND CONFIGURATION
If requested, the device can be installed by
authorized Mectron personnel. Contact the
Mectron sales division or the Distributor
if necessary. Additionally, the Mectron
personnel can provide training to the user
during installation,
following six steps:
1. Unpacking the device;
2. Informing the user about necessary
precautions to ensure proper installation;
4.1 Safety Requirements During Installation
WARNING: Interference with other
equipment. Thoug compliant with standard
IEC 60601-1-2, PIEZOSURGERY plus may
nonetheless interfere with other devices
nearby. PIEZOSURGERY plus with relative
accessories must not be used near to or
stacked on other devices. However, if this
were to prove necessary, you must check
and monitor correct operation of the device
in that configuration.
WARNING: Interference by other
equipment. An electrosurgical knife of
other electrosurgical devices near the
PIEZOSURGERY plus device, and/or its
relative accessories, may interfere with its
correct functioning.
WARNING: Risk of explosion. The
device cannot function in places where
there is an atmosphere saturated with
flammable gases (anaesthetic mixtures,
oxygen, etc.).
CAUTION: The wiring systems in the
room in which the device is installed and
used must comply with applicable standards
and relevant electrical safety requirements.
CAUTION: To avoid any risk of electrical
shocks this device must be grounded.
CAUTION: Do not expose the device
and relative accessories to direct sunlight or
sources of UV light.
WARNING: When the peristaltic
12
which includes the
3. Presenting the user with the possible
device configurations;
4. Demonstrating how to clean, sterilize, and
maintain the system effectively;
5. Filling out the forms required for the
service;
6. Submitting the completed forms to
Mectron to guarantee device traceability
and activate the warranty.
pump cover is open, the foot pedal of the
PIEZOSURGERY plus must not be pressed.
Moving parts may injure the operator.
WARNING: Install the device in a place
where it will be protected from blows and
accidental sprays of water or other liquids.
WARNING: Do not install the device on,
or in the proximity of heat sources. Install
it in such a way as to ensure adequate
circulation of air around the device. Leave
sufficient free space around it, in particular
with reference to the fan on the back of the
device.
CAUTION: The device, with relative
accessories, can be transported, however
it must be handled with care when moved.
Position the foot pedal on the floor in
such a way that it can only be activated
intentionally by the operator.
CAUTION: Position the device in such
a way as to ensure that the plug is easily
accessible as this is considered a means for
disconnecting the power supply.
CAUTION: Before connecting the
handpiece cord to the device, check that
the electrical contacts are perfectly dry. Dry
with compressed air if necessary.
CAUTION: Do not allow the machine
body or foot pedal to become wet. If liquid
should enter the machine body or foot
pedal, this may cause damage.