Switching On The Device; Language Selection - Mectron Piezosurgery Plus Gebrauchs- Und Wartungsanleitung

4.3 Switching On the Device
Switch the device on by means of the
general switch on the back of the device
body, taking care not to press the foot
pedal down during this stage.
4.4 Language Selection
CAUTION: The language can be
selected only if no handpieces are
connected to the device.
Switch the device on without any
handpieces connected.
After the initial system check, the
following screen appears.
The first time the device is switched on,
the English is the default language.
To change the language, press the
language button;
All the available languages will appear.
Press the flag corresponding to the
desired language.
The selected language will appear by the
confirmation button;
INSTALLATION AND CONFIGURATION
1
1
2
on
off
15