mectron Piezosurgery plus Gebrauchs- Und Wartungsanleitung Seite 58

Error Message
MED - 029
Channel out of use.
MED - 030
Internal problem: please
contact assistance.
MED - 032
Lack of internal
communication: please
contact assistance.
MED - 038
"PUMP" button not
active. Fill the irrigation
tubing line by pressing the
footswitch.
MED - 043
Default language - English.
MED - 044
The data need to be
synchronised. Press "OK"
as soon as possible.
The process lasts a few
seconds
MED - 047 / MED - 048
Internal problem.
"SHUTDOWN" the device
then start it again.
MED - 049
The data need to be
synchronised.
"SHUTDOWN" the device
then start it again.
46
Description
Failure in the execution
of the module interface
program.
Failure in the execution of an
internal process.
Internal communication
failure.
"PUMP" button not available.
Language selection not
properly working: English set
as the default language.
Problem in the internal data
synchronization.
Internal problem.
Data synchronization
needed.
Actions Required
Contact immediately the
technical assistance.
The device is working
properly: contact the
technical assistance as soon
as possible.
The device is not working
properly: contact
immediately the technical
assistance.
The device is working
properly: contact the
technical assistance as soon
as possible.
The device is not working
properly: contact
immediately the technical
assistance.
Fill the irrigation circuit
by means of the foot
pedal, before starting the
intervention.
Select the desired language
by using the "language"
button. If the problem
persists, contact the technical
assistance.
Complete the current
operation and then run the
synchronization as soon as
possible by pressing the OK
button.
"SHUTDOWN" the device
and then start it again. If the
problem persists, contact
MECTRON assistance.
"SHUTDOWN" the device
and then start it again. If the
problem persists, contact
MECTRON assistance.