Maintenance; Disposal Method And Precautions; Technical Data - Mectron Piezosurgery Plus Gebrauchs- Und Wartungsanleitung

5

MAINTENANCE

If the devices are not used for a long time, proceed as follows:
1. Disconnect the device from the mains;
2. In case of a long period of inactivity, place
the device in its original packaging and in
a safe area;
3. Before using the device again, clean and
sterilise the handpiece and the wrench
6 DISPOSAL METHOD AND PRECAUTIONS
WARNING: Hospital waste.
Treat the following items as hospital waste:
• Sterile inserts after each intervention;
• Sterile irrigation kit after each
intervention;
• Torque wrench, dispose of when worn or
broken.
Disposable materials and materials that
imply a biological risk
of in accordance with current local
regulations governing hospital waste.
7 TECHNICAL DATA
Device compliant with Regulation (EU)
2017/745
Classification as per IEC/EN 60601-1
Foot Pedal
Essential performance
Device for intermittent operation
Power supply voltage
Max. power consumption
34
must be disposed
according to the instructions provided in
the Cleaning and Sterilisation Manual.
WARNING: Periodically check the
integrity of the power supply cable; when
it appears to be damaged replace it with
original Mectron spare part.
The PIEZOSURGERY
accessories, must be disposed of and treated
as a waste requiring separate collection.
The customer is entitled to deliver the old
device for disposal to the retailer supplying
the new equipment. Instructions on correct
disposal are available from Mectron.
Non-compliance with the previous points may
produce a fine in accordance with the Waste
Electrical and Electronic Equipment (WEEE)
Directive.
Class IIa
I
Applied part: type B (insert)
IP 20 (device)
FS-08 Model
IPx8
"ON/OFF" type
According to the standard IEC 80601-2-60
the device has no essential performance
50 sec. ON - 60 sec. OFF with irrigation,
(represented on the device identification
label as follows:
100-240 V~ 50/60 Hz
250 VA
plus, with relative
)
50 s ON - 60 s OFF