Automatic Sensor Switch-Off; Low Battery Warning - Dover Vsg Rav.td808 Übersetzung Der Originalanleitung

TABLE OF
CONTENTS
Scroll down the menu
Scroll forward in program
Tap them at the same time to switch off the sensor manually.
Level indicator with LED.
4
Not featured on the keypads of the rear sensors RAV.TD806-ROT.TD806-SPA.ART86
3.6.5

Automatic sensor switch-off

The sensors automatically switch off after approx. 5 minutes if no data is received, i.e. when the programme is at a stage where
measurement data is not transmitted/received (e.g. on the start page) or if the PC is switched off.
It is possible to switch off the sensors manually when they are not used (see table in para.
3.6.6

Low battery warning

• Put the sensor back on charge as soon as possible.
F1
EN-16 2015-M362-0
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86
When the remaining charge of one or more sensors is LESS than or EQUAL to 30%, the programme
displays an error message with details of the charging percentage.
This signal is also emitted on the sensor itself with the flashing of the red power LED (see para.
Tap this key to exit the page.
).
3.6.4
Front right sensor charge low
).
3.6.4