Rear Axle Adjustment - Dover Vsg Rav.td808 Übersetzung Der Originalanleitung

TABLE OF
CONTENTS

7.13 REAR AXLE ADJUSTMENT

The following screen appears.
Measurements of the
rear camber angles.
Measurements of the
rear partial toes.
Adjustment, where permitted, in the following order:
Rear camber - Rear partial toe (this also determines the thrust angle).
EN-42 2015-M362-0
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86
Tap this key on the screen of Para. 7.12 after preparation for adjustment is complete.
Tap this key to run the "Jack-Hold" procedure, adjustment with the wheels raised (Para. 7.14.2).
Tap this key to display additional images (if present) to aid in adjustment (Para. 7.5.3).
Tap this key to display the "chassis diagnosis" (graphic-geometric representation of the axles of the
vehicle the operator is working on - Para. 7.15.1).
Tap this key to continue with adjustment of the front axle (Para. 7.14).
Thrust angle
measurements.