Dover VSG RAV.TD808 Übersetzung Der Originalanleitung Seite 141

TABLE OF
CONTENTS
• When the adjustment is complete, press F4 to continue.
• With F3, it is possible to increase and decrease the
"ROTATION" values and display the total toe and camber.
• Press F4 to continue.
• To adjust the set-back in real time ("Set-Back LIVE") while
adjusting an axle, tap the Alt key and another key sequence
will appear.
• Press F3 to display the figure opposite, showing the set-back
angles in real time.
• Once the angle has been adjusted, press F1 to exit.
The operator will be asked to align the wheels again before
continuing.
• The final summary page containing the diagnosis and
adjustment data will appear.
– Press F1 to access the page from which the diagnosis and
adjustment data can be printed or saved.
– Press F2 to display the graphic page with the set-back data.
– Press F3 to select and view the data of the highlighted axle.
– Press F4 to select the highlighted axle to be repeated.
Attention: If the front axle is adjusted again, the rear axles must
be adjusted again too, as they refer to the front one.
• Press F1 to open the page to the side, where it is possible to
print the diagnosis and adjustment data with F3 or save it in
the customised database with F2.
• Press F4 to go back to the introductory page (Logo).
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86
2015-M362-0 EN-59