Auxiliary Functions Menu - Dover Vsg Rav.td808 Übersetzung Der Originalanleitung

TABLE OF
CONTENTS

7.16 AUXILIARY FUNCTIONS MENU

F1
PRELIMINARY OPERATIONS
Select to repeat all operations, beginning with the preliminary ones, in order to obtain new measurements (see para. 7.15).
TEST FOR TOE-IN CURVE
Following the illustrations that appear on the screen, the test for the toe-in curve can be adjusted as follows:
• CHASSIS DIAGNOSIS
Select to display the "Chassis diagnosis" (graphic-geometric representation of the axles of the vehicle on which the operator is
working - Para. 7.15.1).
• SHOW VEHICLE SELECTION
Opens the vehicle selection page (Para. 7.4.1) and allows for a different vehicle to be selected.
• CASTER ADJUSTMENT
Select to adjust the caster values (during the front chassis adjustment, they are normally "frozen" - Para. 7.13.
• TEST DRIVE
Select to open the "Test Drive" procedure (Para. 7.15.2)
RAV.TD808-RAV.TD806 / ROT.SP808-ROT.SP806 / SPA.ART98-SPA.ART86
Tap this key (on the CONTENTS page, para. 7.154) to perform some auxiliary operations or to be able
to repeat some steps of the program if they were not satisfactory or not performed at all.
The following page opens.
Tap this key to:
• adjust the vehicle;
• place the relative tool under the front axle;
• adjust the front partial tips as envisaged by the manufacturer;
• remove the tool from the axle.
The program will go back to the adjustment step
Turn off the vehicle engine and tap this key to return to the Diagnosis and Adjustment summary (Para.
7.15).
2015-M362-0 EN-49